Sunday 17:00-18:00 Room Plenary Plenary 1
Sound Sketch: Shaping sound in space and time using loudspeaker arrays
Monday 08:20-09:20 Room Plenary Keynote 1
Can technology deliver acceptable levels of aircraft noise?
Monday 08:20-9:20 Rooms 219 & 220 Keynote 2
A new era for applications of active noise control
Monday 09:20-10:40 Room 218 L1a Active control of sound
Generation of localized sound using speaker array
Analysis on the timbre of Ambisonics recording by circular and spherical microphone array using a binaural loudness model
Reduction of air space behind piezoelectric absorbing panel using negative stiffness
A stability analysis of cluster active control system of sinusoidal sound in free space
Monday 09:20-11:00 Room 217 T8a Sound Quality
Psychoacoustic analysis of HVAC noise with equal loudness
Perception of sound quality of product sounds A subjective study using a semantic differential
Improving sound quality measures through the multifaceted soundscape approach
Contribution of single sounds to sound quality assessments of multi-source environments
Study on evaluation method of the pure tone for small fan
Monday 09:40-10:40 Room 216 C1a Aeroacoustics
Study on modeling of flow induced noise using Lighthill\'s analogy and boundary element method
Direct numerical simulation of flow and acoustic fields around an air-reed instrument with tone holes
Aerodynamic noise produced in flow around an automobile bonnet
Monday 09:20-10:40 Room 215 A1a Education - outreach to community
Role for an Acoustical Society Journal
Education and Outreach: I-INCE Publications
Communicating the noise message
Public participation at measures to reduce noise in Germany
Monday 09:40-11:00 Room 214 H1a Urban sound propagation
Comparison of acoustic pulse propagation between scale-model measurements and three-dimensional simulation over real-life urban topography
Calculation of sound propagation with highly reflective environments
Model based monitoring of traffic noise in an urban district
Experimental analysis of the noise shielding by a green roof in response to rainfall
Monday 09:20-11:00 Room 213 Q2a Numerical methods in vibro-acoustics
Enhancing the low frequency vibration reduction performance of plates with embedded acoustic black holes
FE based measures for structure borne sound radiation
Experimentally uncertainty quantification in numerical and analytical beam models
Prediction of airborne and structure borne sound transmission through hearing protectors using FEM
Analytical and numerical approaches to predict radiated sound power of fluid-loaded cylindrical shells
Monday 10:00-11:00 Room 212 B4a Machinary N&V - Plant
Analysis of Sound Propagation in Finned Tube Bundle of HRSG in Power Plant
Fatigue Life Estimation of Piping System for Evaluation of Acoustically Induced Vibration (AIV)
Numerical and Experimental Study on Mechanism of Low Frequency Noise from Heat Recovery Steam Generator
Monday 09:20-11:00 Room 211 N1 Speech privacy in buildings
Improvement of body-conducted speech recognition using model estimation
An electronic database of speech sound levels
The Influence of Abfusor Configuration to the Speech Privacy and Intelligibility in an Open Plan Office
Preliminary study of the acoustic behavior concerning an innovative prototype for indoor modular partitioning
Speech Privacy and Intelligibility in Open-Plan Offices as an Impact of Sound-Field Diffuseness
Monday 09:20-11:00 Room 210 N8a Room acoustics
Psychoacoustic analysis of preference reverberation time for Gamelan Bali Concert Hall
Micro-perforated sheets as day-light ceilings
Application of an in-situ measurement method using ensemble averaging technique to material development
The Design of MPP and its Application to Enhance the Acoustics of a Real Auditorium
Withdrawn3
Monday 09:20-10:40 Room 209 D1 Road vehicle noise
Selection of state highway bridge expansion joints in noise sensitive areas
Road traffic facade treatment in Israel
Towards a reduction of noise emission of powered two-wheels - Part 1
Towards a reduction of noise emission of powered two-wheels - Part 2.
Monday 09:20-11:00 Room 208 D4a Pavement modelling and measurement techniques
Test sections to study the acoustical quality and durability of thin noise reducing asphalt layers
Investigating lateral porosity effect on air pumping noise from connected road cavities with CFD simulations
Reduction of vehicle noise at lower speeds due to a porous open-graded asphalt pavement
A study on comparison of noise reduction effect of single-layer drainage asphalt pavement and double-layer drainage asphalt pavement : Part 1 sound power level and frequency characteristic in initial construction
Comparison of road and laboratory measurements of tyre/road noise
Monday 09:20-10:40 Room 207 R1 Underwater acoustics
AQUO Project - Modelling of ships as noise source for use in an underwater noise footprint assessment tool
Shipping noise impacts on marine life
Ambient noise forward prediction from measured characteristics and high resolution modeling
Directionality and coherence of underwater noise and their impact on sonar array performance
Monday 09:40-11:00 Room 206 T4a Noise and health- overall effects and susceptible groups
Daytime and night-time aircraft noise and cardiovascular disease near Heathrow airport in London
Noise sensitivity modulates the auditory-cortex discrimination of sound feature changes
Four electrophysiological studies into noise sensitivity
Traffic noise in relation to self-reported mental health
Monday 11:00-12:20 Room 220 E1 Railway noise and vibration
Exhaust noise control case study for 2800 class locomotive
Railway-noise reduction effect and aged deterioration properties of softer rail pad
Considering the perception of combined railway noise and vibration as a multidimensional phenomenon
Railway vibration reduction using impact dampers
Monday 11:20-12:40 Room 219 P1a Vibration and Shock
Footfall vibration analysis of a high precision manufacturing facility
Analysis on propulsion shafting coupled torsional-longitudinal vibration under different applied loads
Vibration of a curved subsea pipeline due to internal slug flow
Investigations of eddy current vibration damping
Monday 11:00-12:40 Room 218 L1b Active control of sound
Individual Error Signal Design in Narrowband Active Noise Control Systems
Mitigation of indoor low-frequency noise using single channel active noise control system
A power constrained algorithm for multi-zone sound reproduction
Noise reduction through active noise control using stereophonic sound for increasing quite zone
Hybrid active noise barrier with sound masking
Monday 11:20-12:40 Room 217 V1a Metrology - calibration and realisation of standards
Experimental determination of the difference between free-field and pressure sensitivity levels of half inch laboratory standard microphones
Noise dosimeter microphones: an evaluation of the measurement reliability
Realization of Air-borne Sound pressure unit with LDA technique by Spectrum and autocorrelation method in a travelling wave tube
Influence of ground-shield configuration in reciprocity calibration of laboratory standard microphones
Monday 11:00-12:20 Room 216 C1b Aeroacoustics
On the reduction of the engine and aerodynamic noise of aircraft
Benchmark study of numerical solvers for the prediction of interior noise transmission excited by A-pillar vortex
Characteristics of turbulent noise from backward-curved centrifugal fan with rectangular casing
Characterization of an Aeroacoustic Wind Tunnel Facility
Monday 11:00-11:40 Room 215 A1b Education - outreach to community
Common failings of inter-disciplinary studies on noise and the potential solutions
Web-based calculators for transportation noise and vibration
Monday 11:40-12:40 Room 215 A2a Education- to the profession
Post baccalaureate professional development in noise control engineering
Extending the scope of urban sound planning by education and research
Expanding the horizon of machinery noise source control via a dedicated short course on gear dynamics and noise
Monday 11:20-12:00 Room 214 H1b Urban sound propagation
Use of traffic modeling and geographic information systems to evaluate noise reduction policies in urban environments: case study in Bogota - Colombia
Assessment of noise pollution sourced from entertainment places in Antalya, Turkey
Monday 11:20-12:40 Room 213 Q2b Numerical methods in vibro-acoustics
Implementation aspects of the Boundary Element Method including viscous and thermal losses
Prediction of the radiated sound power from a fluid-loaded finite cylinder using the surface contribution method
A review of the coupling parameter of the Burton and Miller boundary element method
A comparison of numerical methods for the large-scale modelling of acoustic coupled fluid-structure interactions of double-walled cylindrical shells
Monday 11:20-12:20 Room 212 B4b Machinary N&V - Plant
Minimising the cost of noise control in the coal seam gas industry by selection of noise treatments for gas wells using engineering optimisation
Acoustic and Vibration Stability Analysis of Furnace System in Supercritical Boiler
Noise Control for Fluid Power Systems
Monday 11:20-12:20 Room 211 N3 Green sustainable buildings
The challenge of meeting both acoustic and thermal comfort in 21st century school classrooms
Noise associated with the ground water systems serving residential geothermal heat pumps
Acoustical investigation of open-plan offices in green building: Simulation experiment
Monday 11:20-12:40 Room 210 N8b Room acoustics
Room impulse response measurement with a spherical microphone array, application to room and building acoustics
Sound source localization accuracy of ambisonic microphone in anechoic conditions
Influence of time-varying talker directivity on the calculation of speech transmission index from speech in a room acoustical context
Validation of lateral fraction results in room acoustic measurements
Monday 11:00-12:40 Room 209 D2a Vehicle noise vibration and harshness (NVH)
Study on the vertical vibration of an occupant - seat cushion system
Development of an adaptive composite leaf spring
Measurement of the distributed dynamic stiffness of seats under compression to analyze dynamic characteristic of seats
Tire/road contact modeling for the in-vehicle noise prediction
Structural transfer path analysis of automobile tire/road noise
Monday 11:20-12:40 Room 208 D4b Pavement modelling and measurement techniques
Project ROSANNE: Rolling resistance, Skid resistance, and Noise Emission measurement standards for road surfaces
Effect of road surfaces on road traffic noise on the public roads of Japan - An investigation based on tyre/road noise measurement
SPB and CPX results of rubberized surfaces in the Italian urban and extra-urban context
A study on comparison of noise reduction effect of single-layer drainage asphalt pavement and double-layer drainage asphalt pavement: Part 2 long-term change of sound power level and frequency characteristic
Monday 11:20-13:00 Room 207 R3a Underwater noise and its control
LDV-based vibration measurement of a stiffened plate covered by a rubber coating with multi-layered periodic porous in air
Numerical Study on Non-Cavitating Noise of Marine Propeller
Optimisation applied to composite marine propeller noise
Adulteration of underwater acoustic measurements
LES-based Numerical Analysis of Surface-Pressure Fluctuations and Unsteady Thrust of a Marine Propeller
Monday 11:20-12:20 Room 206 T4b Noise and health- overall effects and susceptible groups
Non-specific physical symptoms and related functioning in people with self-reported noise sensitivity
What factors are associated with noise sensitivity in the UK population?
Influence of visual factors on noise annoyance evaluation caused by road traffic noise in indoor environment
Monday 13:40-15:20 Room 220 K2a Applying building envelop design for noise mitigation
Prediction method of insertion loss of detached houses against road traffic noise based on a point sound source model- Prediction formula considering the heights of buildings and a prediction point
Numerical analysis of sound insulation performance of double-layer wall with vibration absorbers using FDTD method
Investigations on road noise level spatial variability within a specially designed acoustic balcony
The sound transmission loss across ventilation window under active noise cancellation
Noise Control Potential of Vacuum Isolation Panels
Monday 13:40-15:00 Room 219 P1b Vibration and Shock
Transient response of complex stiffness system using a green function from the Hilbert Transform and the steady space technic.
Free vibration analysis of elastically connected multiple-beams with general boundary conditions using improved Fourier series method
In-Situ Assessment of Building Isolation Bearings
Defect size estimation and analysis of the path of rolling elements in defective bearings with respect to the operational speed
Monday 13:40-15:40 Room 218 L1c Active control of sound
Active noise control based on state feedback by a concentrated mass model
Active Structural Acoustic Control of Sound Power Radiation from a Soft-Core Sandwich Panel
Effect of transducer mismatch on the performance of spherical microphone arrays
Active noise reduction of a coupled rectangular cavity using active wave control
Withdrawn2
Design of Active Noise Control System Applied to Helicopter Cabins
Monday 13:40-15:00 Room 217 V1b Metrology - calibration and realisation of standards
Calibration Methodologies and the Accuracy of Acoustic Data
The Effect of Wind on Low Frequency Noise
First results in the realization of the unit Watt in airborne sound
Influence of reflecting plane having finite surface density on sound power level of reference sound sources calibrated in hemi free-field
Monday 13:40-15:20 Room 216 C2a Airframe/flow-induced-noise
Influence of Structural Elasticity on Trailing Edge Noise
Wind Tunnel Test of Trailing Edge Serrations for the Reduction of Wind Turbine Noise
Measuring owl flight noise
Analysis and Control of Flow-Acoustic Feedback-Loop Interactions in Transitional Airfoils
Effects of wing tip shaping on noise generation
Monday 13:40-15:40 Room 215 A2b Education - to the profession
The NOISE database and other electronic and web-based tools for researchers and educators
Audio and Acoustical Response Analysis Environment (AARAE): a tool to support education and research in acoustics
Experiences of MOOCs and 25 year short courses for industries
European Acoustics Association Schools
Car mechanic training course and acoustic technique education
Study and practice of joint teaching between ZJU and UWA
Monday 13:40-15:20 Room 214 H2a Outdoor sound propagation
Experimental validation of the modelling of surface roughness effects by an effective impedance
Acoustic Study and Visualization of a complex echo at the Klondike Bluffs, in the Arches National Park, Utha, USA
Field experiment on sound propagation from an elevated directional source
Field experiment on ground-to-ground sound propagation from a directional sourcee
Withdrawn7
Monday 13:40-15:40 Room 213 Q2c Numerical methods in vibro-acoustics
The Numerical Prediction and Features Analysis of Cylindrical Shell Acoustic Radiation Noise
Modelling the forced response of a stiffened structure
Coupled analysis of two-dimensional acoustic and membrane vibration by concentrated mass model
A study of the assumptions used in statistical energy analysis
The Adaptive Order FEM approach for vibro-acoustic simulations: a report on a newly implemented technology with application examples demonstrating its superior performance to conventional FEM methods
A reduced-order stochastic finite element analysis for structures with uncertainties
Monday 13:40-15:20 Room 212 B2 Machinary N&V - Engines
Experimental Analyses of Vibration and Noise of Faulted Planetary Gearbox
Parametrically Excited Vibration in Rolling Element Bearings
Vibration reduction of brush cutter considering human response characteristic
Withdrawn4
Coupling analysis of torsional vibration and engine rotational speed control system of marine propulsion shating
Monday 13:40-15:20 Room 211 N4a Classroom acoustics
The same reverberation time in two identical rooms does not necessarily mean the same levels of speech clarity and sound levels when we look at impact of different ceiling and wall absorbers.
An investigation into the acoustics of an open plan compared to enclosed Kindergarten classroom
A pilot study on the influence of language on the results of speech intelligibility tests in classrooms
New generation learning environments: creating good acoustic environments - policy to implementation
Acoustical Quality Assessment of Lecture halls at Lund University, Sweden
Monday 13:40-15:40 Room 210 N7a Acoustic criteria in regulations and classification schemes for buildings
How to modify a tested fire-rated wall to improve its sound transmission rating, while maintaining its official fire-rated qualification
Heavy/soft impact sound criteria and regulation in Korea
Defining vehicular noise levels to manage risk associated with exterior facade design
International proposal for an acoustic classification scheme for dwellings - Background and perspectives
Classification scheme of floor impact sounds with the standard rubber ball in dwellings
A new approach to building acoustics regulation in Canada
Monday 13:40-15:40 Room 209 D2b Vehicle noise vibration and harshness (NVH)
The Influence of Vibrations on Vehicle Occupant Fatigue
Automobile Power-train—Coupling Vibration Analysis on Vehicle System
Study on startup transient vibration of a vehicle with 3-cylinder engine
The Transmission of Vibration at Various Locations on Vehicle Seat to Seated Occupant Body
Developing Powertrain Mounting Systems in the Virtual Engineering World Using a Full Vehicle NVH Simulator
Road noise sensitivity analysis with respect to suspension geometry
Monday 13:40-15:20 Room 208 D4c Pavement modelling and measurement techniques
On the sound absorption coefficient of porous asphalt pavements for oblique incident sound waves
Comparative assessment for low-noise pavements by means of the ISO 11819 and the OBSI
ODSURF: Optimized low noise urban road surfaces
Influence of surface textures of road markings on tyre/road marking noise
Assessing the acoustic properties of audio-tactile road markings
Monday 13:40-15:40 Room 207 R2 Underwater noise measurement
A modelling approach to spatial extrapolation of ocean ambient noise measurements
Patch near-field acoustical holography based on vector hydrophone array
Characterising the acoustic footprint of Australia\'s new research vessel RV Investigator
Modeling ocean noise on the global scale
Marine Soundscape Ecology
Using low cost single-board microcontrollers to record underwater acoustical data
Monday 13:40-15:20 Room 206 S1a Soundscape and its diversity in history and culture
Soundscape Study of Urban Public Spaces along the Sea Shore
Analysis of soundscape of selected urban public places and its impact on their assessment by users
The Urban Park Soundscape in Mountainous Cities:A case study in Chongqing
Withdrawn1
Withdrawn9
Monday 15:40-17:00 Room 220 K2b Applying building envelop design for noise mitigation
Cost reduction of noise treatments in the oil & gas industry - design of noise mitigation for gas compressor stations using engineering optimisation
Design for noise mitigation measures for public housing developments in Hong Kong
Investigation of sound insulation for a Supply Air Window - field measurements and occupant response
Tackling Traffic Noise Through Plenum Windows - An Application in Hong Kong
Monday 15:40-18:00 Room 219 T1 Reaction to aircraft noise
New insights into perception of aircraft and community noise events
Stated choice valuation of aircraft noise and other environmental externalities at Bangkok Suvarnabhumi Airport
The impact of civil versus military aircraft noise on noise annoyance
Relaxations of operating restrictions on Noise and resident\'s reaction at Narita International Airport
The next generation of supplementary aviation noise metrics and their use in managing aviation noise.
The economic value of aircraft noise effects: a UK perspective
Continuous Descent Approach (CDA) compared to Regular Descent Procedures: Less Annoying?
Monday 16:00-18:00 Room 218 L2 Signal processing for active control
Adapting an MSE controller for active noise control to nonstationary noise statistics
Multivariable control of tonal disturbances using minimization of the maximum error signal through adaptive error signal weighting
Adaptive feedback noise control with leaky FeLMS algorithm
Active sound design for a passenger car based on adaptive order filter
A modified frequency domain adaptive filter for active noise control
Active control of vehicle powertrain noise using inverse model LMS algorithm
Monday 15:40-17:20 Room 217 T8b Sound quality
Stereo or binaural headphones for sound location
Noise Reduction Measures of Noisy Kitchen Devices and Evidence of their Improvement by an Objective Analysis of Spontaneous EEG Measurements
Effect on car interior sound quality according to the variation of noisy components of tire-pattern noise
Rhythmic constant pitch time stretching for digital audio
The influence of the sensation of rhythm on comfort and productivity
Monday 16:00-18:00 Room 216 C2b Airframe/flow-induced-noise
Attenuation of acoustic resonances in an inclined open cavity using Micro Perforated Panels
Self-noise prediction of a sharp-edged strut using a quasi-periodic CFD-BEM technique
Estimation of pressure fluctuations in a turbulent boundary layer based on vibro-elastic models
Effects of Hydrodynamic and Acoustic Pressure Fluctuations on Transmitted Sound in Wavenumber-Frequency Domain
The effect of flow on the natural frequencies of a flexible plate
The flow-induced noise of square finite wall-mounted cylinders in different boundary layers.
Monday 16:00-17:40 Room 215 U1 Technical expertise in noise assessment and management
New Zealand Code of Practice for retail fireworks - Revision of the noise testing provisions: Experiences and findings
Discussion on noise control at workplaces
Comparative study of the performance of smartphone-based sound level meter apps, with and without the application of a 1⁄2\" IEC-61094-4 working standard microphone, to IEC-61672 standard metering equipment in the detection of various problematic workplace noise environments
Protection of workers from risks caused by loud sound fields. Comparison between the European and the United States standards.
A practical comparison of occupational noise standards
Monday 15:40-17:20 Room 214 H2b Outdoor sound propagation
Field noise measurement in the huge industrial plants for accurate prediction
Determining the transmission loss of apertures above the plane wave cutoff frequency
Ground effect due to periodic and resonant roughness structures
Acoustic Yagi-Uda Antenna Using Resonance Tubes
Determination of noise damping by forests
Monday 16:00-18:20 Room 213 Q2d Numerical methods in vibro-acoustics
Impulsive Response Analysis Using Transient Energy Distribution Analysis
Vibration transfer analysis based on characterization of vibration energy dissipation
Vibration analysis of a steam turbine blade
Improvement of Experimental SEA model accuracy using Independent Component Analysis
The modeling and free vibration analysis of coupled plates of various types
Numerical noise generation in modelled bearing vibration signals
Free vibrations of a box-type structure by plates with arbitrary boundary conditions
Monday 16:00-17:40 Room 212 B1 Fan and duct noise
Standard, quiet and super quiet - the modelling of flow and the reduction of turbulences
Stall detection using near-field low frequency and pressure modulation in turbomachines
Fan duct noise elimination by the use of helicoidal resonators
Local improvement of flow and noise performances of axial-flow fans in a household refrigerator
Withdrawn6
Monday 15:40-16:20 Room 211 N4b Classroom acoustics
Vocal problems for teachers and school acoustics - a field study
Classrooms and voice recognition applications in a foreign language teaching
Monday 16:40-17:40 Room 211 N2 Healthcare facility acoustics
Acoustic design guidelines for dementia care facilities
A summary of the 2014 FGI and sound & vibration guidelines for healthcare facilities
Review of design approaches to acoustics in Australian hospitals
Monday 16:00-17:40 Room 210 N7b Acoustic criteria in regulations and classification schemes for buildings
Extensions of EN 12354 vibration reduction index expressions by means of FEM calculations
Psychoacoustical evaluation of heavyweight floor impact sounds in apartment buildings
A new metric to quantify and evaluate low frequency impact noise
Determination of vibration acceptability and annoyance design indicators for human response to wooden-floor vibrations
Open plan offices - classification scheme based on ISO 3382-3 parameters
Monday 16:00-18:00 Room 209 D2c Vehicle noise vibration and harshness (NVH)
Indoor pass-by noise engineering: a motorbike application case
Target setting and source contribution for sound quality of a motorcycle
Vehicle Chassis Decoupling Control Based on Neural Network Inverse Method
The characteristic identification of disc brake squeal based on ensemble empirical mode decomposition
Instability prediction of brake squeal by nonlinear stability analysis
Modelling of Fluid-Structure Interactions in the Hydraulic Circuit of Passive Interconnected Suspensions
Monday 15:40-18:00 Room 208 D6 Tyre/road noise - tyre factors
Tyre tread pattern noise optimization by a coupled source-human perception model
An investigation of the relationship between texture and tyre/road noise for different types of road surfaces and passenger car tyres
A study of the tyre cavity resonance and its mitigation using modal analysis method
Characterisation of low-noise tyres for the roads of Hong Kong
Temperature influence on tyre/road noise of selected tyres
Influence of Circumferential Tread Pattern Stiffness on Tire Road Noise Generation under Driving Torque
A Simulation Methodology for Tire/Road Vibration Noise analysis
Monday 16:00-18:00 Room 207 R3b Underwater noise and its control
Study on the effect of alignment style on shafting-shell coupled system radiated noise caused by propeller force
Underwater noise generated by merchants ships in coastal waters of the Gulf of Gdansk
Modelling underwater shipping noise in the Great Barrier Reef Marine Park using AIS vessel track data
Real variability in ship systems' noise and vibration. Design and through-life management implications for underwater noise and habitability
Is underwater thermal noise useful?
Attenuation of low frequency underwater noise using arrays of air-filled resonators
Monday 15:40-16:20 Room 206 S1b Soundscape and its diversity in history and culture
On the Study of Effects of Views to Water Space on Noise Annoyance Perceptions at Homes
WithdrawnA
Monday 16:40-17:40 Room 206 S2 Soundscape and auditory cognition
How the meaning a person gives to tranquility could affect the appraisal of the urban park soundscape
Studies of Combination Effects of Sound on Biology and Cognition- Interdisciplinarity in Action
Temporal features extraction for the binaural soundscape samples
Tuesday 08:20-09:20 Room Plenary Keynote 3
Noise and Low frequency noise from Wind Turbines
Tuesday 08:20-09:20 Room 213 Keynote 4
The impact of building acoustics on speech comprehension and student achievement
Tuesday 09:20-11:00 Room 218 M1 Metamaterial
Acoustic metamaterial panel composed of funnel-shaped cell unit having multi-band negative material properties
Tailoring Acoustic Metamaterials to Aeroacoustic Applications
Noise shielding using active acoustic metamaterials with electronically tunable acoustic impedance
A simple model of effective elastic properties of materials with inclusions
Random Incidence Transmission Loss of a Metamaterial Barrier System
Tuesday 09:20-10:40 Room 217 G1 Wind turbines -Evaluation at neighbours I
Special Noise Character in Noise from Wind Farms
Investigating the impacts of wind turbine noise on quality of life in the Australian context: A case study approach.
Outcome of systematic research on wind turbine noise in Japan Part 1
Outcome of systematic research on wind turbine noise in Japan Part 2
Tuesday 09:20-10:40 Room 216 C3a EU research projects on aircraft noise
AFLoNext - A European Contribution to Airframe Noise Control
European aviation noise research network (X-NOISE)
OPtimisation for low Environmental Noise impact AIRcraft - OPENAIR
Fundamental indirect noise generation by interactions between entropy, vorticity and acoustic waves in the context of aero engine applications
Tuesday 09:20-10:40 Room 215 A3a Noise policy
The evolution of noise policy and noise management in England during the life of the UK\'s Institute of Acoustics
Progress on environmental noise policies from 2008-2013 in Asia and the world
Challenges in Planning against Road Traffic Noise in Hong Kong
A Metric Matrix Establishment for Cases Studies on the Effectiveness of the Key Environmental Protection Policies for Transportation Pollution Control
Tuesday 09:20-11:00 Room 214 H3 Noise mapping prediction tools
A low-budget road traffic noise model for individual building evaluation - a case study in Western Australia
Lessons from round 2 noise mapping in England
A web-based approach for the evaluation of acoustic performance of development designs and assessment of performance of mitigation elements
Fast traffic noise mapping of cities using the Graphics Processing Unit of a personal computer
Statistical Method for an Assessment of Actions against Noise and Air Pollution in Order to compare the total Improvement in an Investigation Area
Tuesday 09:40-10:40 Room 213 Q2e Numerical methods in vibro-acoustics
Dispersion diagrams of a water-loaded cylindrical shell obtained from the structural and acoustic responses of the sensor array along the shell
Acoustic forcing of flexural waves and acoustic fields for a thin plate in a fluid
Acoustic and flexural wave energy conservation for a thin plate in a fluid
Tuesday 09:20-11:00 Room 212 Q6a Inverse approaches in vibro-acoustics
Separation of non-stationary sound fields using single layer pressure-velocity measurements
Comparison of patch acoustic holography methods for confined space
Research on eigenfrequency shifts due to cracks in cylindrical structures and the application in non-destructive testing
Approximate model of sound source in consideration of evanescent waves in far-field acoustical holography
Vibration rendering on a thin plate by actuator array on the boundary
Tuesday 09:20-10:40 Room 211 N6a Noise in lightweight structures
Influence of design and leakages of the window-wall connection on the sound insulation.
A model based on loudness level to describe airborne sound insulation
Improvement of sound insulation performance at low frequencies by several fibrous absorbers in lightweight double leaf partition
Parametric study of direct airborne insulation of wood stud walls in midrise construction
Tuesday 09:20-10:40 Room 210 N8c Room acoustics
A coherent image source method for sound prediction in long spaces with a sound absorbent ceiling
A trial on calculating the equivalent reflection coefficient by acoustic distance measurement method based on phase interference in the actual sound actual field
Absorption modeling with ensemble averaged impedance for wave-based room acoustics simulations
A technique based on the equivalent source method for measuring the surface impedance and reflection coefficient of a locally reacting material
Tuesday 09:20-11:00 Room 209 D2d Vehicle noise vibration and harshness (NVH)
Vehicle noise functional performance indicators using tire sound intensity
Verification of contribution separation technique for vehicle interior noise using only response signals
Development of a prototype system to evaluate of contribution rate of each noise source in road traffic noise
Mechanism of Noise Generation on Outer Rotor Motor
Parameter quantification for evaluation of vehicle\'s impulsive BSR noise
Tuesday 9:40-11:00 Room 208 D8a Motor vehicle noise - policy and regulation
The Dutch Road Noise Mitigation Program
Value for Money in Road Traffic Noise Abatement
The danish national road noise strategy
The Swiss way to silent roads
Tuesday 09:20-10:40 Room 207 R4 Detection, localisation and classification of sources
Performance of time domain and time-frequency domain adaptive beamformers with moving sound sources
Application of the virtual time-reversal technique to transient sources localization in complex immersed struc
Advanced signal processing methods for the analysis of transient radiated noise from submarines
Cross correlation matched field localization for unknown emitted signal waveform using two-hydrophone
Tuesday 09:40-11:00 Room 206 T3a Effects of noise on humans
Combined effects of low frequency vertical vibration and noise on whole-body vibration sensation
Vibration properties of hand-arm system while holding a grip
Assessment of noise-induced annoyance by tones in noise from building mechanical systems
Effects of room acoustics on comprehension of foreign-accented speech by native and non-native English-speaking listeners
Tuesday 11:00-12:00 Room 220 E3 Railway wheel and rail noise
Curve Squeal: Causes, Treatments and Results
Bearing defect size estimation for extended raceway defects
Acoustic rail grinding - measures of long term effectiveness: Epping to Chatswood Rail Link case study
Tuesday 12:00-12:40 Room 220 E4 Rail acoustics policy
Comparison of Kilde and NORD2000 rail noise prediction methodologies
A simplified approach for evaluating noise impact from high-speed lines
Tuesday 11:00-12:40 Room 219 T7 Loudness and other psycho-acoustical parameters
Development of a new loudness model in consideration of audio-visual interaction
Noise evaluation based on loudness-perception characteristics of older adults
Loudness Using a Threshold Correction Factor
Measurement of attention to auditory signal in noisy environment
Improvements in calculating the loudness of time varying sounds
Tuesday 11:20-12:20 Room 218 M2 Nanomaterials in acoustics
Thermophones using carbon nanotubes and alternative nanostructures for high power sound generation and noise cancellation
Acoustic absorption behaviour of carbon nanotube arrays
Improving sound absorption bandwidth of micro-perforated panel by adding porous materials
Tuesday 11:20-12:40 Room 217 G2 Measurement of wind turbine noise
Wind turbine noise measurements - How are results influenced by different methods of deriving wind speed?
Wind turbine sound - metric and guidelines
Correlation of amplitude modulation to inflow characteristics
An investigation of Different Secondary Noise Wind Screen Designs for Wind Turbine Noise Applications
Tuesday 11:00-12:20 Room 216 C3b EU research projects on aircraft noise
COSMA - A European Approach on Aircraft Noise Annoyance Research
Multi-objective optimization of takeoff and landing procedures: level abatement vs quality improvement of aircraft noise
IDEALVENT: Characterization of installation effects in aircraft Environmental Control Systems
NINHA: Noise Impact of aircraft with Novel engine configurations in mid- to High Altitude operations
Tuesday 11:00-12:40 Room 215 A3b Noise policy
Control of noise from public entertainment activities in Hong Kong
New techniques to determine specific noise for increasing the effectiveness of continuous unattended noise monitoring systems
Live music and the \'agent of change\' principle
Continuous noise monitoring network design: an end user perspective
Residential acoustic amenity in \'vibrant\' mixed use areas
Tuesday 11:00-12:20 Room 213 Q2f Numerical methods in vibro-acoustics
Study on aero-acoustic structural interactions in fan-ducted system
Transfer-matrix-based approach for an eigenvalue problem of a coupled rectangular cavity
Modal contributions to the acoustic responses of fluid-loaded shells
Sound transmission between rooms coupled through partition with elastically restrained edges
Tuesday 11:20-12:40 Room 212 Q6b Inverse approaches in vibro-acoustics
A shape classification for the acoustic radiator using its sound field
A moving sound source localization method based on TDOA
Withdrawn8
High-resolution nearfield acoustic holography based on iterative weighted equivalent source method
Tuesday 11:00-12:40 Room 211 N6b Noise in lightweight structures
Laboratory data examining impact and airborne sound attenuation in heavy timber loft style construction.
Challenges for acoustic calculation models in \"Silent Timber Build\", Part 2
Laboratory facilities for sound transmission measurements - validation by measurement and simulation methods
Effects of sample construction, sample size and niche depth on measured sound transmission loss
The uncertainty in sound insulation of an industrially prefabricated lightweight timber construction
Tuesday 11:00-12:40 Room 210 N8d Room acoustics
Digital sound system modelling and design
The prediction of the complex characteristic acoustic impedance of porous materials
An explicit time-domain finite-element method for room acoustics simulation
A BEM study of the influence of musicians on onstage sound field measures in auditoria
Evaluation of the acoustic performance of a theatrical space set up in a restored Latomia in Ragusa Iblea
Tuesday 11:40-12:40 Room 209 S4a Soundscape and methods of evaluation
Soundscape Transects: Case Studies from New York City and O\'ahu
Towards a quantitative tool to assess the soundscape
Measuring a Soundscape of the captive Southern White Rhinoceros (Ceratotherium simum simum)
Tuesday 11:20-12:00 Room 208 D8b Motor vehicle noise - policy and regulation
Outcome based optimisation of road traffic noise mitigation
Buffer distances for surface roads and elevated highways correlated with pre-existing ambient noise
Tuesday 11:20-12:40 Room 207 R5 Bubble acoustics
Planar laser induced fluorescence imaging of bubble formation
Interaction of a pair of horizontally aligned bubbles in gravity field
Acoustic imaging of surface ship wakes
Application of lattice Boltzmann method to research bubble interacting with spherical particle
Tuesday 11:20-12:20 Room 206 T3b Effects of noise on humans
Road traffic noise, air pollution and cardio-respiratory health in European cohorts: a harmonised approach in the BioSHaRE project
Transferability of the results from laboratory basic research on cognitive impairment by background sound to real life offices
Prediction of virtual sound source elevation improved by including input source spectral shape in the prediction equation
Tuesday 13:40-15:20 Room 220 E2 Ground-borne vibration and noise from railways
Study on elevated light rail induced vibration attenuation along the surrounding ground
Force Density Measurements at Sound Transit
Experimental modal analysis of high-speed railway carriage
Use of a "Hybrid" Empirical/Finite Element Approach for Predicting Groundborne Vibration from Rail Systems
A parametric study on the influence of track irregularities upon train induced ground vibration
Tuesday 13:40-15:20 Room 219 V2a Sound visualization and manipulation
Reconstruction of sound fields with a spherical microphone array
Non-stationary Holography on Arbitrary Source Shapes
Exploring the limitations and expectations of sound source localization and visualization techniques.
Detection and direction estimation of a sudden loud sound for the hearing assistive eyeglasses
Developing beam-forming devices to detect squeak and rattle sources by using FPGA
Tuesday 13:40-15:40 Room 218 L3a Applications and systems for active control
Active Snore Control System Integrated with Apnea Detector
Active flow control of the exhaust noise from internal combustion piston engine
Development of a voice shutter (Phase 1: A closed type with feed forward control)
Applying Active Noise Control Technique for Augmented Reality Headphones
A decoupled hybrid structure for active noise control with uncorrelated narrowband disturbances
Tuesday 13:40-15:00 Room 217 G3 Wind turbines - Evaluation at neighbours II
Using Wind Farm Noise Auralisations for Effective Community Consultation
The noise characteristics of \'compliant\' wind farms that adversely affect its neighbours
Initial findings of the UK Cotton Farm Wind Farm long term community noise monitoring project
The Relevance of the Precautionary Principle to wind farm noise planning
Tuesday 13:40-15:20 Room 216 C4a New experimental techniques
Development of the Microphone-Array Measurement Technique for use in Cryogenic and Pressurized Wind Tunnels
Beamforming of aeroacoustic sources in the time domain
Correlation of parallel car interior and exterior beamforming measurements in a wind tunnel
Three-dimensional beamforming of aeroacoustic sources.
Beamforming array optimisation and phase averaged sound source mapping on a model wind turbine
Tuesday 13:40-15:20 Room 215 A3c Noise policy
Quiet Construction: State-of-the-Art Methods and Mitigation Measures
Noise sentinel - a proactive approach to noise management in mining operations at BHP Billiton Worsley Alumina Pty Ltd
Quality Powered Mechanical Equipment System to Reduce Construction Noise in Hong Kong
Challenge on Environmental Mitigation Measures on Site Formation Work to Achieve Win-Win-Win Situation for Project Proponent,
Effective noise objectives for industrial and resource developments - setting, compliance assessment monitoring and audit
Tuesday 13:40-15:40 Room 214 H4a Airport noise modelling and measurement
Noise assessment in the neighbourhood of Italian military airports
Measurement of noise exposure planar distribution in aircraft approach path vicinity
Challenges in Producing an Australian Noise Exposure Forecast
Reliability of aircraft noise evaluation by measurement for comparison with prediction
Angular and distance dependence of the standard deviation of maximum sound level for aircraft noise
Land-use planning at airports in Germany
Tuesday 13:40-15:20 Room 213 Q3a Vibro-acoustic methods for noise control treatments
Numerical modelling of the vibro-acoustic behavior of a closed vehicle with frequency dependent polymer materials
Research on vibration and sound radiation characteristics of ship stiffened composite plate structure
Optimal design of unconstrained damping material on a thin panel by using topology optimization
Stochastic porous model of a bone-implant healing process using polynomial chaos expansion
Optimal Configurations of ACLD/Plate for Bending Vibration Control using INSGA-II
Tuesday 13:40-15:20 Room 212 Q7 Modal analysis
Removal of shaft speed related components from the response signals of a machine with varying speed prior to Operational Modal Analysis
A detailed experimental modal analysis of a clamped circular plate
Automotive cabin characterization by acoustic modal analysis
Regeneration of frequency response functions from poles and zeros: a discussion with implications for cepstrum-based operational modal analysis
Using frequency and modal analysis to attenuate low frequency waves
Tuesday 13:40-15:40 Room 211 N6c Noise in lightweight structures
Prediction of Acoustic Performance of Composite Steel Floors
Flanking sound transmission in an innovative lightweight clay block building system with an integrated insulation used at multifamily houses
Approximate formulae for the average one sided specific radiation wave impedance of a finite rectangular panel
A new building acoustical concept for lightweight timber frame constructions
Measurements of junction vibration level differences of timber framed constructions
The Optimization of a Wooden Floor Design Based on Validated Finite Element Models
Tuesday 13:40-15:40 Room 210 N8e Room acoustics
Development and sound absorption of interior adjustable acoustical panels
Theory and three-dimensional numerical simulation of sound propagation along a long enclosure with side opening
Generalized alternative image theory to estimating sound field for complex shapes of indoor spaces
Reducing Noise and Optimizing Sound within Working Spaces
Parameters design of a nonlinear membrane absorber applied to an acoustic cavity
Finite element sound field analysis for correction of absorption coefficient in reverberation room
Tuesday 13:40-15:40 Room 209 D3a Electric / hybrid vehicles
Study of high frequency noise from electric machines in hybrid and electric vehicles
Comprehensive Automotive Active Sound Design part 2: Operational Sounds and Brand Sound
Comprehensive Automotive Active Sound Design part 1: electric and combustion vehicles
Measurement and analysis of the interior noise and the transfer path of acoustic phenomena into the driver cabin of a battery electric vehicle
Vibro-acoustic measurements and techniques for electric automotive applications
Vibration Control of In-Wheel SRM for Electric Vehicle Applications
Tuesday 13:40-15:20 Room 208 D5 Ultralow noise surfaces
Results from first Danish full scale test section with poroelastic road surface
Tyre/road noise reduction by a poroelastic road surface
Innovative low noise surfaces - comparison of damping and absorption
Developing a durable and ultra low noise poroelastic pavement
The best porous asphalt pavement in Sweden so far
Tuesday 13:40-15:40 Room 207 R6a Underwater noise from pile driving
Overview of existing Noise Mitigation Systems for reducing Pile-Driving Noise
The new noise mitigation system \'Hydro Sound Dampers\': history of development with several hydro sound and vibration measurements
Analytical model for the sound pressure waveform radiated underwater when an offshore steel pipe pile is driven with an impact hammer
Caltrans compendium of underwater sound data from pile driving - 2014 update
New achievements in underwater noise modelling for offshore pile driving
A comparison of numerical methods for the time domain modelling of pile driving noise in the near field
Tuesday 13:40-15:00 Room 206 S4b Soundscape and methods of evaluation
WYSAHIWYG (What You See And Hear Is What You Get): Learning from photocartography in mapping the cross-modal features of the soundscape
Aures - The Advanced Environment Noise Monitoring System - Leq(A) or new measurement technology?
WithdrawnB
QUADMAP, three pilots and a methodology
Tuesday 15:40-18:00 Room 220 T6a Psycho-acoustics in noise evaluation
Ground-borne vibrations, sounds and secondary airborne sounds from tramways: a psychoacoustic evaluation including health aspects
Psychoacoustic experiments on some unwanted interior car sounds
Continuous judgment of sound quality of electric home appliances
The comparison of psychological evaluation between military aircraft noise and civil aircraft noise
ISO 532 - Living and working with alternative loudness standards
Overall loudness of short time-varying sounds
Measurement of air-conducted and bone-conducted dental drilling sounds
Tuesday 15:40-18:00 Room 219 T2 Reaction to traffic noise
Noise annoyance for a motorway compared to urban roads
Using mathematical models to predict annoyance from combined noise sources in the city of Dubai
The influence of location of the privileged vehicle siren on the vehicle traffic safety
Structural equation model of road traffic noise annoyance in Vietnam
Experimental study of traffic noise and human response in an urban area: deviations from standard annoyance predictions
Social surveys on community response to road traffic in five cities in Vietnam
Subjective experiment on auditory localization for traffic alarm sounds in a heavy truck
Tuesday 16:00-18:00 Room 218 L3b Applications and systems for active control
Active noise control in practice: transformer station
An integrated passive and active control system for reducing haul
A new structure for nonlinear narrowband active noise control using Volterra filter
Basic study on active acoustic shielding: phase 6 improving the method to enlarge AAS window-2
Virtual sound barrier for indoor transformers
Applying an active noise barrier on a 110 KV power transformer in Hunan
Tuesday 16:00-17:40 Room 217 G4 Measurement - Infrasound, LFN, Tonality
Analysis of wind turbine low frequency noise prediction accuracy
Comparison of the noise levels measured in the vicinity of a wind farm for shutdown and operational conditions
Infrasound and blade pass frequency levels in areas adjacent to wind farms
Propagation thresholds and measurement of infrasound to establish separation distances from wind farm turbines to residences
Investigation of the time dependent nature of infrasound measured near a wind farm
Tuesday 16:00-17:40 Room 216 C4b New experimental techniques
Sound source localisation using a single acoustic vector sensor and multichannel microphone phased arrays
Identification of acoustic event of selected noise sources in a long-term environmental monitoring systems
Aeroacoustic time-reversal in the presence of a reflecting surface
On the effect of mean flow profile, wavelength and array length on focal-resolution of a quadrupole source using aeroacoustic time-reversal
Detection and quantification of building air infiltration using remote acoustic methods
Tuesday 15:40-16:40 Room 215 U2 Noise management in challenging industries
Defending workers against hearing loss: Why aren't workers hearing our message?
Noise in the United Kingdom printing industry: then and now
Development of an Occupational Noise Exposure Reduction Project for Defence in Australia
Tuesday 16:40-17:40 Room 215 B5 Buy quiet
Is the airborne sound power level of a source unambiguous?
New York City\'s New Noise Code and NYU\'s Citygram-Sound Project
Sound pressure level and sound power level declarations: navigating the maze
Tuesday 16:00-17:40 Room 214 H4b Airport noise modelling and measurement
Including atmospheric propagation effects in aircraft take-off noise modeling
Assessing all noise sources in one model. Implementation of INM and ECAC 3rd Edition in Noise Mapping Software
Practical method of considering effects of terrain and building structures on sound propagation
Experimental study of meteorological and ground effects on outdoor sound propagation for developing aircraft noise prediction model
Influence of the atmospheric stratification on the sound propagation of single flights
Tuesday 15:40-17:00 Room 213 Q3b Vibro-acoustic methods for noise control treatments
Prediction of Sound Transmission through Elastomeric Bulb Seals
Modeling and experimental validation of cellular porous material with large resonant inclusions
Applying dynamic mechanical analysis to research & development for viscoelastic damping materials
Optimization design method for Constrained Damping layer's noise reduction based on the Hoff sandwich plate theory
Tuesday 17:00-18:00 Room 213 Q4a Vibration and vibro-acoustic experiments
Assessment of Vibrations from a Seismic Test Facility
An approach to optimal sensor placement for vibration tests on large structures
Analysis of seismic response on the excitation of support structures
Tuesday 15:40-17:40 Room 212 B3 Machinary N&V - Computations
Analytical model for the airborne sound pressure waveform radiated when an offshore steel pipe pile is driven with an impact hammer
Vibration Input Identification using Dynamic Strain Measurement
The new method for focusing properties of the acoustical steady field in room
Sound radiation from a water-loaded cylinder due to machine noise
Acoustic radiation response prediction of thin-walled box with particle dampers using multiphase flow theory of gas-particle
A Rayleigh-Ritz method based on improved Fourier series for vibration analysis of cylindrical shell coupled with elastic beams
Tuesday 16:00-18:00 Room 211 N6d Noise in lightweight structures
Research on sound insulation of multiple-layer structure with porous material and air-layer
Design of a standalone, modular test facility for measuring sound transmitted through a common ceiling plenum
Sound insulation of application for composite wood panel
Vibration reduction in lightweight floor/ceiling systems with a sand-sawdust damping layer
The equivalent translational compliance of steel studs and resilient channel bars
Noise control by design: A tool intended for architectural use
Tuesday 16:00-18:00 Room 210 N5 Propagation and generation of low frequency noise in buildings
Challenges for acoustic calculation models in \"Silent Timber Build\", Part 1- FEM
Acoustic Solutions for Wooden Intermediate Floors
Cost benefit analysis of acoustic treatments for inner-city residential premises near entertainment venues
Improvement effect of the infrasound and vibration due to repair of the bridge
Low frequency sound transmission in multifamily wooden houses
Comparison of the results of a laboratory experiment and a field study with regard to acoustic quality in wooden buildings and recommendations for classification of acoustic quality
Tuesday 16:00-18:00 Room 209 D3b Electric / hybrid vehicles
Designing and delivering the right sound for quiet vehicles
Sound design of electric vehicles - Challenges and risks
Subjective evaluation of additive sound designed to reinforce acoustic feedback of electric vehicle
Urban environment audio simulation for contextual evaluation of Quiet Vehicles\' sound design
Development of a next-generation audible pedestrian alert system for EVs having minimal impact on environmental noise levels project eVADER
Detectability and hearing impression of additional warning sounds for electric or hybrid vehicles
Tuesday 15:40-17:20 Room 208 D7 Modelling and mapping traffic noise
Effects upon the urban noise of prioritizing bicycle traffic at intersections
Noise modelling of road intersections
Road traffic noise prediction model \"ASJ RTN-Model 2013\" proposed by the Acoustical Society of Japan - Part 2: Study on sound emission of road vehicles
The effects of vegetation on road traffic noise
Road traffic noise prediction model \"ASJ RTN-Model 2013\" proposed by the Acoustical Society of Japan - Part 1: Outline of the calculation model
Tuesday 16:00-17:40 Room 207 R6b Underwater noise from pile driving
Hydro sound measurements during the installation of large diameter offshore piles using combinations of independent noise mitigation systems
New Hydro Sound Dampers to reduce piling underwater noise
Dynamic measurements of pile deflections as a source of underwater sound emissions during impact driving of offshore pile foundations
On the estimation of prediction accuracy in numerical offshore pile driving noise modelling
An efficient model for prediction of underwater noise due to pile driving at large ranges
Tuesday 16:00-18:00 Room 206 S3 Soundscape and noise control
Sharing ideas about noise management and community design
The measurement of soundscapes - Is it standardizable?
Soundscape mapping in urban contexts using GIS techniques
How do ordinary people evaluate noise pollution in the context of environmental issues?
On seeking methodology to \"measure\" a soundscape
Soundscape Identification in Noise Annoyance Evaluation
Wednesday 08:20-10:40 Room 220 T6b Psycho-acoustics in noise evaluation
Evaluation of Diesel powertrain noise -Difference between Professional and Non-professional-
A Study on sound quality evaluation index of car door latch and improving sound quality by modifying door latch assembly design
In-service measurement of heavy vehicle engine brake noise
Influence of low SPL and bird twittering sounds on the loudness for road traffic noise
A psychoacoustic assessment of road traffic noise for indoor aural comfort in high-rise built environment
Simulation of gear rattle to aid in the development of sound quality metrics for diesel engine component specification
Influences of Vehicle Exterior Images on Sound Quality Ratings: German vs. Japanese Drivers
Wednesday 08:20-10:20 Room 219 V2b Sound visualization and manipulation
Virtual in-ear microphone for in-vehicle noise control based on array technology and modified zero point attraction LMS algorithms
Wideband acoustical holography
Development of the Double NAH method
Multi-spectral acoustical imaging
Creation of a single sound field for multiple listeners
A microphone position calibration method in a reverberant environment for a randomly distributed array
Wednesday 08:20-10:40 Room 218 L4a Active vibration control and active structural acoustic control
A study on the influence of model uncertainties on the performance of a feedback control based ASAC system
Active Noise Control Experiments for an Acoustic-Structural Coupled Enclosure using Structural-Based Virtual Sensors
Semi-active noise suppression based on SSD technique using piezoelectric elements
Combined force-moment actuator for ASAC
Analysis of frequency-domain active noise control algorithm with parallel structure
Active vibration control using compliant-based actuators
On synchrophasing control of vibration for a floating raft vibration isolation system
Wednesday 08:20-10:20 Room 217 G5 Evaluation of wind turbine noise source mechanisms
Cyclic pitch for the control of wind turbine noise amplitude modulation
Tonal characteristics of wind turbine drive trains
Application of stochastic wind model to investigate swishing characteristics of infrasound and low frequency noise from wind turbine
Classification of damage for planetary gear of wind turbine simulator
Wind Turbine Tower Resonance
Numerical simulation and aeroacoustic noise modelling of a wind turbine using a blade section in an annulus
Wednesday 08:20-09:40 Room 216 C5 Aircraft engine noise
Adapting a propeller noise model for aircraft at cruising altitudes
Aeroacoustic source localization on open rotor aircraft model in wind tunnel tests
Lattice Boltzmann Study of the Geometric Effect of a Perforated Orifice on Its Damping Performance
A Coherence Approach to Characterizing Broadband Sound Fields in Ducts
Wednesday 09:40-11:00 Room 216 C6 Jet noise
Challenges associated with studying nonlinear distortion of acoustic waveforms emitted by high-speed jets
Acoustic characteristics of annular jets
Using Post analysis of a noise sample stream in place of noise monitor based thresholds in the detection of aircraft noise
Severity assessment of circular orifice synthetic jet based on sound pressure level
Wednesday 08:40-10:20 Room 215 W1 Instrumentation
Infrasound sensors and their calibration at low frequency
Controlling Cyanobacteria with ultrasound
An innovative signal processing technique for the extraction of ants\' walking signals
Report of low power noise monitoring system using solar panel
Measurement Examples of a New Wireless Measuring System
Wednesday 08:20-10:40 Room 214 H5 Numerical methods for predicting outdoor sound propagation
Incorporating directivity in the Pseudospectral time-domain method by using spherical harmonics
Effect of input data in the impact studies of road traffic noise in a time-domain model
Acoustic Green\'s functions using the Sinc-Galerkin method
Calculation of Acoustic Green\'s Function using BEM and Dirichlet-to-Neumann-type boundary conditions
Comparison of the results of numerical and geometrical outdoor acoustic simulations in a real-life area
Three-dimensional wave-based simulation of outdoor sound propagation using the constrained interpolation profile method with a variable-grid technique
Noise propagation simulation in and around buildings using improved integral energy equations
Wednesday 08:20-10:20 Room 213 Q4b Vibration and vibro-acoustic experiments
Broadband dynamic parameters measurement by longitudinal vibration testing using pulse wave
Vibration analysis based on time-frequency analysis with a digital filter: Application to nonlinear system identification
A new high-frequency impedance tube for measuring sound absorption coefficient and sound transmission loss
Improving the sound insulation of construction boards with a high damping glue
Experimental study on sound transmission in condenser
The actuality of acousto-mechanical resonances for noise control
Wednesday 08:40-10:40 Room 212 Q5 Vibro-acoustics of lightweight composite panels
Dynamic Laminate Model for Broadband Frequency Prediction
Global sensitivity analysis of acoustic transmission models
Numerical modelling and experimental determination of the dynamic behaviour of composite structures
Quieting a rib-framed honeycomb core sandwich panel for a rotorcraft roof
Sound radiation from the waveguide double plate regarding air cavity between the upper and lower plates
Patterned fibre constrained layer damping for composite materials
Wednesday 08:20-10:20 Room 211 K1a Noise barriers
Transformation of sound by a phononic crystal
Lightweight noise barrier
A study on sound insulation using rectangular plenum chamber arrays
Three dimensional quasi-periodic noise barriers
Sustainability Criteria for standardisation of noise reducing devices
The frequency and angular dependence of the absorption coefficient of common types of living plants
Wednesday 08:40-10:20 Room 210 N9a Impact noise in buildings
Comparison of Resiliently Suspended Floating Slab Constructions
Floor impact sound insulation of timber three-story school building for final full-scale fire test
Field Floor Impact Noise South-East Queensland (Australia)
Subjective evaluation of floor impact sound of wood-frame construction dwellings in different living situation
Uncertainties and validation procedures for the Compact Measurement Setup
Wednesday 08:40-10:20 Room 209 D9a Mufflers and silencers
Improving muffler performance using simulation-based design
Adaptive quarter wavelength tube tuned by varying air temperature
Potential of fibre-reinforced components for lightweight construction machines with low noise emission
Performance of multiple micro-perforated panels in a duct
Acoustic performance of a plate with varying perforations
Wednesday 08:40-10:00 Room 208 F1a Noise events from transportation noise
An overview of concepts and past findings on noise events and human response to surface transport noise
Are noise events from surface transport predictable? Insights from a wide measurement campaign
A concept on predicting road network scale noise event probability by road function
The role of noise events in noise research, policy and practice (peaks, events or both...)
Wednesday 08:20-10:40 Room 207 R7 Numerical methods in underwater acoustics - Transmission
Results of the ray-tracing based solver BEAM for the approximate determination of acoustic backscattering from thin-walled objects
Acoustic ray propagation in the waters off eastern Australia using ocean glider data
The influence of finely layered seabeds on acoustic propagation in shallow water
Further Considerations for Approximating a Physics-Based Model of Surface Reflection Loss
Tidal effects on acoustic propagation off eastern Australia
A forecasting method for near-field scattering characteristics of underwater complex shells
The spatial structure of an acoustic wave propagating through a layer with high sound speed gradient
Wednesday 08:20-10:00 Room 206 S5 Soundscapes and health related quality of life
Aviation-related noise-induced annoyance and health-related quality of life
Sound Source Study in Shenzhen China
Health in the noise context: the relativity of absolute health
Assessing the relationship between perceived disturbances from traffic, restorative qualities of the living environment, and health
Influence of soundscape and interior design on anxiety and perceived tranquillity of patients in a healthcare setting
Wednesday 11:00-13:00 Room 220 T6c Psycho-acoustics in noise evaluation
Effect of Visual Stimulus on Subjective Impression of Indoor Sound Fields with Various Reverberation Times
Effects of active noise control on subjective annoyance and cortical neural activities for car engine noise
Train noise - A psychoacoustic investigation for indoor aural comfort in high-rise urban environment in the tropics
Progress in calculating tonality of technical sounds
Signal repetition rates and their relationship to the pleasantness of multi-tone sounds
Unsupervised feature learning on monaural DOA estimation using convolutional deep belief networks
Wednesday 11:00-13:00 Room 219 V2c Sound visualization and manipulation
Enhanced sound field reproduction within prioritized control region
Distance perception of a nearby virtual sound source reproduced by a linear loudspeaker array
Discovering a physical parameter associated with a near-field sound control: comparing HRTFs of nine loudspeakers in a non-anechoic room
Manipulation of source width based on sound field reproduction
Standardization of Korean head-related transfer function based on tensor-singular value decomposition
Linear optimal source distribution mapping for binaural sound reproduction
Wednesday 11:00-13:00 Room 218 L4b Active vibration control and active structural acoustic control
A novel semi-active quasi-zero stiffness vibration isolation system using a constant-force magnetic spring and an electromagnetic linear motor
Source identification of a vibrating plate using phase conjugation and interior boundary element method
Design of natural frequency adjustable electromagnetic actuator and active vibration control test
An experimental investigation on the acoustic performance of a flapping wing Micro-Air-Vehicle
Using a psychoacoustic criterion for the actuator placement in an active structural acoustic control system
Development of a noise reduction system with piezoelectric material to transmitted noise (Structure for improvement of the noise reduction effect)
Wednesday 10:40-11:40 Room 217 G6 Measurement - Modeling and propagation
Influence of non-standard atmospheric conditions on turbine noise levels near wind farms
Assessing the Validity of Wind Farm Noise Monitoring Data for Periods of Partial Wind Farm Operation
Noise Propagation from a Vertical Axis Wind Turbine
Wednesday 11:00-13:00 Room 216 C7 Computational aeroacoustics
Calculation of Duct Flow Noise Using CE/SE Method
A particle accelerated CFD-BEM technique applied to aeroacoustic scattering
Self-noise prediction of a flat plate using a hybrid RANS-BEM technique
The nonlinear inhomogeneous Galbrun-Equation: Derivation and possible Ways to solve numerically
Numerical investigation of the refraction effects by jet flows in anechoic wind tunnels
Boundary Condition for the Implementation of Arbitrary Acoustical Modes
Wednesday 11:00-12:20 Room 215 U3 Personal hearing protectors and headsets
Earmuff Comfort Evaluation
Construction Apprentices, Work and Noise
Comparison of speech intelligibility between normal headsets and bone conduction hearing devices at call center
Anthropometry of External Auditory Canal by Non-contactable Measurement
Wednesday 11:00-12:40 Room 213 Q4c Vibration and vibro-acoustic experiments
Influence of background noise on non-contact vibration measurements using particle velocity sensors
Vibrational Energy Flow in Carbon Composite Structures
Low frequency sound transmission of stiffened panels
Measurement of Structural Intensity Using an Angular Rate Sensor
Experimental and numerical tools for the characterization of ultrasonic propagation for nuclear reactor application
Wednesday 11:00-13:00 Room 212 P2 Vibrations in bridges, foot bridges and similar structures
Modal floor parameters and their correlation with footfall vibration
A review of impact dampers to control cross wind vibration of structures due to vortex shedding
Mini-trampoline vibration exciter- Force measurements
Research activities on INCE/J RTV (Road Traffic Vibration)-Model - Part: 2 Prediction of ground-borne vibration induced by traffic from cutting- and banking-structure roads -
Research activities on INCE/J RTV (Road Traffic Vibration)-Model Part: 1 Prediction of road traffic vibration for elevated roads
Vibration insulation of footbridges so as to reduce human discomfort
Wednesday 10:40-12:00 Room 211 K1b Noise barriers
On the effect of shear and bias flow on the performance of acoustic liners
On enhanced sound absorption by non-uniform liners
An experimental investigation of cavity noise control using mistuned Helmholtz resonators
The effectiveness of particle damping for use on vertical surfaces
Wednesday 10:40-13:00 Room 210 N9b Impact noise in buildings
Design and Acoustic Performance of a Spring Isolated Outdoor Rooftop Basketball Court
Measuring Ln without using a tapping machine?
Comparing low frequency impact noise using a tapping machine and heavy/hard impact source on various fitness floor assemblies
Accuracy of prediction methods for impact sound pressure levels
Effect of modulation on perceived annoyance of floor impact noise
Flanking transmission in three different lightweight wooden building types
Directimpactsound insulation of cross laminate timber floors with and without toppings
Wednesday 10:40-12:00 Room 209 D9b Mufflers and silencers
Acoustic two-port simulation model for the particle oxidation catalyst (POC®)
Performance analysis of a suction muffler in a hermetic reciprocating compressor using CAA techniques based on Lattice Boltzmann Method
Hybrid coupling method to nonlinear acoustic source and linear duct system in compressor
Sound attenuation using duct silencers with micro-perforated panel absorbers
Wednesday 10:40-12:20 Room 208 F1b Noise events from transportation noise
Smart sound monitoring for sound event detection and characterization
Influence of loudness of noise events on perceived sound quality in urban context
Sound Exposure Levels from Trains and Sleep Disturbance
Mobility and life quality relationships - Measurement and perception of noise in urban context
Towards new less noisy mobility patterns in cities
Wednesday 11:00-13:00 Room 207 R3 Numerical methods - Interaction with submerged structures
An Analytical Substructure Method for the Analysis of Vibration Characteristics on Conical-Cylindrical-Spherical Combined Shells in Vacuum
Moving boundary similarity method and its application on ship structural borne noise prediction
Lattice-Boltzmann simulation of circular column coupled with square column in cross flow
Sound radiation from nested cylindrical shells
Wave based method for vibration and acoustic characteristics analysis of underwater cylindrical shell with bulkheads
The study on sound radiation of semi-submerged cylindrical with antisymmetric velocity distribution
Wednesday 10:20-11:20 Room 206 K3 Noise control within offshore facilities and maritime vessels
Isolator Internal Resonance and Radiated Noise from Ships
A method for demonstration of ALARP for noise control
Verification of a Duct Resonator Array for Larger Pipe Diameters
Wednesday 11:40-13:00 Room 206 Q2g Numerical methods in vibro-acoustics
Analysis of acoustic radiation of a ring-stiffened cylindrical shell in underwater based on precise integration transfer matrix method
Free vibration analysis of orthotropic rectangular Mindlin plates with general elastic boundary conditions
Withdrawn5
Research on vibration and acoustic radiation of planetary gearbox housing
Wednesday 14:00-15:00 Room Plenary Plenary 2
Soundscape planning as a complement to environmental noise management
Monday 09:20-Tuesday 18:00 Foyer Posters
A Noisy Vehicle Surveillance Camera (NoivelCam) System
Reducing noise pollution by increasing sound absorption of carpets
A research on the validity of expression method of sonic environment by using Japanese onomatopoeias
A Study of Pavement Noise for Asphalt Pavements with Different Service Life in National Highway
Underwater acoustic passive localization base on multipath arrival structure
Virtual sensing in the reverberant field based on the harmonic signal from the emitting source.
A Soundscape Research on the Route Gezi Park-Tunel Square
Active reduction of sound transmission in aircraft cabins: a smarter use of vibration exciters
Practical consideration of noise from fans
Robust time-domain acoustic contrast control design under uncertainties in the frequency response of the loudspeakers
A triple microphone array for surround sound recording
A new method for monitoring far-field noise level with a few near-field sensors
Application of disturbance-observer-type velocity estimator to electroacoustic absorber for noise absorbing
Experimental approach on transmission of low-frequency sound into a building
Objective comparison between Ambisonics basic decoding and a SIRR-based parametric decoding in the context of concert hall auralization
Wind turbine noise: practical immission measurements
The empirical assessment of human vibration propagated in building and HVAC systems
Evaluation of clipping-noise suppression of stationary-noisy speech based on spectral compensation
A study of degraded-speech identification based on spectral centroid
Footprint analysis concerning noise: approaches, tools and opportunities
One-dimensional unidirectional acoustic boundary through active control method
Railway noise impact assessment: An overview of the Railway Noise and Vibration Research project in South Korea
Design sensitivity analysis of the acoustic dispersion relations
A Design of Comfortable Dental Treatment Sound Based on Auditory Masking
Improvement of PC Hearing Support System: The Use of One-USB-OS
Experiment and study of tactile characteristics resulting from vibration of a touch panel
Development of GPGPU-Based Interactive Simulation for Numerical Analysis of Sound Wave Propagation
The study on the woofer speaker characteristics due to design parameters
A study on the prediction of the noise reduction performance according to applying the rail web-damper in curved track section
Beat period control of bell sound using an operational modal analysis
Measurement of Temperature Dependence in the Piezoelectric Active Element of a Knock Sensor
Characteristics of polymeric interlayer films and its impact on acoustical performance of laminated glass
Bootstrap masker generation method for speech masking systems
Evaluation on flexible beamformers with curved-type parametric loudspeaker for spatial audible area design
A design of reflective audio spot with parabolic reflector for sound pressure improvement on separating emission of carrier and sideband waves
Investigation of vibration transmission properties of compressor grommets in domestic refrigerators
Integrated test system for tyre/road noise - ISO/DIS 11819-2 and AASHTO TP76-12 methods
Relationship between soundscape and historical-cultural elements of Historical Areas in Beijing: a case study of Qianmen Avenue
Application of fractal dimension to the evaluation of environmental sound
Multiple Audio Spots Design Based on Separating Emission of Carrier and Sideband Waves
Effectiveness of background music for noises in hospital wards
Numerical Analysis of Sound Wave Propagation Using CIP-MOC Method with Non-Uniform Grid
Basic study on improvement of stage acoustics by active method
Privacy protection method for speech using small speakers placed around a head
Characterizing the ecology of the Aboriginal soundscape
Determining noise effects from industrial development on Aboriginal soundscapes: insight into best practices
A study of the position of the reference microphone of active noise control of feedforward type for MRI noise
Efficiency evaluation of subspace-based spectral subtraction based on iterative eigenvalue analysis in real environments
High accuracy calculating model for sound field simulation with DFT-based FDTD on polar-quaternion-based axis towards craft restoration
Narrow area control for individual sound image generation by combining NBSFC and liner loudspeaker array
Sensitivity analysis of source region size on results of Stochastic Noise Generation and Radiation model
An evaluation on comfortable sound design of unpleasant sounds based on chord-forming with bandlimited sound
Study of Enhanced Sound-absorbing performance for Polyurethane Foam which Carbon Nano-tube is applied
Management Policy on Community Noise to Improve the Quality of Life - Focused on Apartment Noise
A three-stage method for sound field reproduction in rooms with reflection boundary:theory and experiments
Modeling sound radiation from a baffled vibrating plate for different boundary conditions using an elementary source technique
On frequency characteristics of bone conduction actuators by measuring loudness, acceleration and otoacoustic emission
Basic study on inset position of stack in the system with branch tubes for applying thermoacoustic silencer to multi cylinder engine muffler
The Influence of the Load Condition upon the Radial Distribution of Electromagnetic Vibration and Noise in a Three-Phase Squirrel-Cage Induction Motor
An impedance tube measurement technique for controlling elastic behavior of test samples
Impedance matrix of rubber-cord fluid-filled hose
A Study of Traffic Noise Characteristic of Pavement Types Using NCPX Method
Breathing mechanism of a cracked rotor subject to non-trivial mass unbalance
Environmental impact assessment of road noise with noise map in Korea
Survey on vehicle horn use in urban areas of Korea
The effects of the aircraft noise and multiple echoes on speech intelligibility of outdoor public address system
High directivity masking sound system for achieving speech privacy
Priority of subjective attribute in discrimination between sound fields of architectural spaces
Influence of Visual Information on Subjective Evaluation of Road Traffic Noise
RONDA - CPX Trailer Initial Test Results
Using the interpolation in the DIN EN ISO 17201-1
Investigation on high-frequency noise in public space.
A study on 3-D Sound Field Localization System Using Parametric Loudspeaker and Indirect Loudspeakers for Reverberation Reproduction
Vehicle suspension and steering nonlinear integrated system coordinated control based on human-vehicle function allocation
Numerical and experimental analysis of the effectiveness of material composition of piezoelectric elements with chosen shapes on plate vibration reduction
Research on the directive property control for a phased rectangular loudspeaker array
Localization of multiple environmental sound sources by MUSIC method with weighted histogram
Influences of whole-body vibration on roughness sensation
On a Binaural Model with Front-back Discriminator using Artificial Neural Network trained by multiple HRTF catalogs