• Acoustic Consultancy
• Starting out in Acoustics: A Journey into the Unknown
• Acoustic Sensing of the Marine Environment
• Acoustic Signature Management for Maritime Platforms
• Free-field source levels from measurements conducted in a water tank
• Aerodynamic and Aeroacoustic Analyses of a UAV Propeller with Trailing Edge Serrations
• Acoustics of Materials and Products
• Influence of acoustofluidic parameters on velocity streaming of sonicated medical microbubbles
• Coherent waves in finite, asymmetric, one dimensional periodic structures
• On the Acoustic Effect of Screens and Perforated Facings
• Acoustics at the nanoscale
• Aeroacoustics, Aircraft, and Aerospace Applications
• The effect of porosity on the porous coated cylinder diameter
• The UNSW Anechoic Wind Tunnel
• Use of the Aviation Environmental Design Tool (AEDT) in Australia and the Australian Noise Exposure Forecast (ANEF) Technical Endorsement Process
• Architectural and Building Acoustics (incl. Specialist Spaces)
• Comparison of acoustic retroreflection from corner cube arrays using FDTD simulation
• Six decades of Room Acoustics - research, design and rooms, and presence
• Designing for speech in a circular room
• Room Modelling Software Comparison
• Building Vibration and Structure Borne Noise
• Floor airborne and impact sound insulation performance of cross laminated timber vs. timber joist and concrete systems
• Low audio frequency vibration performance of common isolation configurations for bolted connections
• Acoustic behaviour of CLT slabs
• Ground-borne Noise & Vibration Results from recent Tunnelling & Construction Projects in Sydney
• A Case Study in the Isolation f Flanking Noise in Prefabricated Timber Construction and Buildings Relying on Load Bearing Internal Timber Cladding
• A method for testing and rating the acoustic performance of caulking compounds.
• Time-domain modelling of boundary reflection using an acoustic wave propagator and image source method
• Construction Materials
• Acoustic compliance with F5.6 of the Building Codes of Australia for waste water pipes
• Working with Acoustic Products and Mechanical Services
• Defence Science
• Environmental Acoustics and Vibration
• Surf Wave Parks - Assessing the Sound of Fun
• Removal of Continuous Extraneous Noise from Exceedance Levels
• Bird Call Recognition using Deep Convolutional Neural Network, ResNet-50
• Experimental analysis of sound directivity from sound propagation through non-isothermal, turbulent exhaust jets in cross-flow
• Predicting environmental noise using neural networks
• Setting noise objectives for outdoor music festivals in rural locations
• The collation and use of data from remote monitoring systems
• The application of control theory to the management of sound emitted from open-cut mining
• Acoustic and electronic modelling of environmental noise and vibration, building acoustics and electro-acoustic equivalent circuits
• Design Strategies for Perceived Acoustic Comfort in Urban Environment - A Literature Review
• Spatial resolution for modelling of noise in urban areas
• Environmental Noise Classification through Machine Learning
• Environmental Noise Policy and Regulation, Standards
• Strategic versus simplistic noise modelling of the Bay Area of California: comparing the impact on policy and the community
• Use of the Aviation Environmental Design Tool (AEDT) in Australia and the Australian Noise Exposure Forecast (ANEF) Technical Endorsement Process
• Impacts of Underwater Noise on Marine Animals
• Instrumentation and Measurement Techniques
• An experimental verification of iterative microphone removal beamforming arrays
• Accelerometers used in the measurement of jerk, snap and crackle
• Accelerometer mounting - comparison of stud and magnetic mounting methods
• Extracting vibration signal from measured data polluted by thermal noise using Kalman filtering technique
• Low Frequency Noise and Infrasound
• The influence of binaural incoherence on annoyance reported for unpleasant low frequency sound
• Marine Soundscapes and Noise from Marine Development
• Soundscapes and ambient noise in the ocean
• Analytical model for the effect of a nonlinear piledriver cushion on underwater sound pressure waveforms radiated from offshore piledriving
• Musical Acoustics
• Noise and Vibration Control
• Modelling the vibration response of laminated beam based on equivalent material properties
• Nonlinear vibration of nonlocal strain gradient ultrasmall tubes with a geometric imperfection
• Complex vibration of pulsatile fluid-conveying ultrasmall tubes embedded in a nonlinear elastic medium
• Testing and Performance Quantification of Acoustic Louvres
• Quasi-zero stiffness magnetic levitation vibration isolation system with improved passive stability: A theoretical analysis
• Inverse Methods to Derive Effective Properties of Metamaterials
• Modelling the vibration response of disk-type windings in power transformers
• An inverse method to determine the vibratory level requirement of an equipment item rigidly mounted on a ship structure
• The effectiveness of utilising a damping compound for attenuating rainfall noise on metal roofing
• Nonlinear active noise control for a system with a nonminimum-phase secondary path
• Occupational Health and Safety
• Reducing risk of hearing damage in indoor live music venues through use of sound level management software
• Railway Noise and Vibration
• Vibration test on syte - Case study Palermo tramway
• Straddle Carrier and Construction Noise Management on Level Crossing Removal Project - Caulfield to Dandenong
• Road Traffic Noise
• Transport noise interventions and health
• RONDA CPX Trailer Measurements Along the Hunter Expressway
• Commissioning the Public Address System for a New Road Tunnel
• Signal Processing
• Detection of snapping shrimp using machine learning
• Accelerometers used in the measurement of jerk, snap and crackle
• Heart rate measurement of nesting birds using a microphone in a plastic egg
• Bird Call Recognition using Deep Convolutional Neural Network, ResNet-50
• Modelling and defect size estimation of a defective bearing
• Localization of a sound source in uniform horizontal linear motion using a pair of acoustic sensors
• Separating forcing function and transfer function effects in machine diagnostics
• Commissioning the Public Address System for a New Road Tunnel
• Commissioning the Public Address System for a New Road Tunnel
• Automatic Recognition of Environmental Sounds
• GMAW metal transfer mode identification from the welding sound
• Sound source localization and signal extraction with multiple microphone arrays
• Underwater Sound Propagation, Measurements and Modelling
• Detection of snapping shrimp using machine learning
• Modelling the effect of nonlinear internal waves on acoustic propagation parallel to their crests
• Prediction of unsteady propeller performance in an inhomogeneous wake
• Further Approximation of a Model of Coherent Reflection Loss at the Ocean Surface
• Modelling sound propagation in the ocean: a normal mode approach using finite elements
• Multiple Scattering Effect in Acoustic Response from a Bubble Cloud
• Investigation of Structural and Acoustic Responses of a Submerged Cylindrical Enclosure under Arbitary Force Excitations
• Can a MEMS piezo microphone perform as an alternative to a hydrophone?
• Beyond Lloyd's mirror effects: accounting for diffuse scattering, bubble absorption, and bottom reflections in the determination of monopole source levels of ships
• The n^2-exponential sound speed profile and its use for modelling sound propagation in an isothermal surface duct
• Wind Turbine Noise
• The effect of wind farm noise on human response: An analysis of listening test methodologies
• Characterizing tonal amplitude modulation of wind farm noise
• _Other